Displacement amplification factors for steel eccentrically braced frames          下载免费PDF全文

Ahmet Kuşy𝚤lmaz  Cem Topkaya 《地震工程与结构动力学》2015,44(2):167-184

Inelastic deformation capacity of links is a factor that significantly influences design of steel eccentrically braced frames (EBFs). The link rotation angle is used to describe inelastic link deformation. The link rotation angle is generally calculated by making use of design story drifts that in turn are calculated by modifying the elastic displacements by a displacement amplification factor. This paper presents a numerical study undertaken to evaluate the displacement amplification factor given in ASCE7‐10 for EBFs and the rigid‐plastic mechanism used for calculating link rotation angles. A total of 72 EBFs were designed by considering the number of stories, the bay width, the link length to bay width ratio, and the seismic hazard level as the prime variables. All structures were analyzed using elastic and inelastic time history analyses. The results indicated that the displacement amplification factor given in ASCE7‐10 provides unconservative estimates of the story drifts. On the other hand, the rigid‐plastic mechanism provides conservative estimates of link rotations. Based on the results of the numerical study, a new set of displacement amplification factors that vary along the height of the structure and modifications to the rigid‐plastic mechanism were developed. In light of the proposed modifications, the EBFs were redesigned and analyzed using inelastic time history analysis. The results indicated that the proposed modifications provide improvements for the displacement amplification factor and link rotation angle calculation procedures. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Effect of gravity framing on the overstrength and collapse capacity of steel frame buildings with perimeter special moment frames          下载免费PDF全文

Ahmed Elkady  Dimitrios G. Lignos 《地震工程与结构动力学》2015,44(8):1289-1307

This paper investigates the effect of the gravity framing system on the overstrength and collapse risk of steel frame buildings with perimeter special moment frames (SMFs) designed in North America. A nonlinear analytical model that simulates the pinched hysteretic response of typical shear tab connections is calibrated with past experimental data. The proposed modeling approach is implemented into nonlinear analytical models of archetype steel buildings with different heights. It is found that when the gravity framing is considered as part of the analytical model, the overall base shear strength of steel frame buildings with perimeter SMFs could be 50% larger than that of the bare SMFs. This is attributed to the gravity framing as well as the composite action provided by the concrete slab. The same analytical models (i) achieve a static overstrength factor, Ω_s larger than 3.0 and (ii) pass the collapse risk evaluation criteria by FEMA P695 regardless of the assigned total system uncertainty. However, when more precise collapse metrics are considered for collapse risk assessment of steel frame buildings with perimeter SMFs, a tolerable probability of collapse is only achieved in a return period of 50 years when the perimeter SMFs of mid‐rise steel buildings are designed with a strong‐column/weak‐beam ratio larger than 1.5. The concept of the dynamic overstrength, Ω_d is introduced that captures the inelastic force redistribution due to dynamic loading. Steel frame buildings with perimeter SMFs achieve a Ω_d > 3 regardless if the gravity framing is considered as part of the nonlinear analytical model representation. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

汶川震区狭陡型泥石流典型特征与防治   总被引：1，自引：1，他引：0       下载免费PDF全文

杨东旭  游勇  陈晓清  赵万玉  石胜伟  谢忠胜 《水文地质工程地质》2015,42(1):146-153

汶川MS 8.0强震发生6年来,震区暴发了数量众多、类型多样的泥石流灾害,其中一类可总结为"狭陡型泥石流",其特征指标及防治对策与震前常规泥石流存在显著差异,给灾后重建和灾害防治技术提出了新的命题。在对(极)重灾区泥石流活跃的五大片区(汶川、都江堰、绵竹、北川、安县)进行大量现场调查和资料分析的基础上,提出了强震区狭陡型泥石流的概念并给出定义,提炼了其在形成、活动及危害等方面的典型特征;通过工程实践,分析了其独特的治理难点及相应的防治对策,介绍了几项极具适应性和有效性的防治新技术,可为强震扰动区泥石流治理研究和工程设计提供一类新的思路和借鉴。  相似文献   

Inelastic displacement demands in steel structures and their relationship with earthquake frequency content parameters     

C. Málaga‐Chuquitaype  A. Y. Elghazouli 《地震工程与结构动力学》2012,41(5):831-852

This paper deals with the estimation of peak inelastic displacements of SDOF systems, representative of typical steel structures, under constant relative strength scenarios. Mean inelastic deformation demands on bilinear systems (simulating moment resisting frames) are considered as the basis for comparative purposes. Additional SDOF models representing partially‐restrained and concentrically‐braced (CB) frames are introduced and employed to assess the influence of different force‐displacement relationships on peak inelastic displacement ratios. The studies presented in this paper illustrate that the ratio between the overall yield strength and the strength during pinching intervals is the main factor governing the inelastic deformations of partially‐restrained models and leading to significant differences when compared with predictions based on bilinear structures, especially in the short‐period range. It is also shown that the response of CB systems can differ significantly from other pinching models when subjected to low or moderate levels of seismic demand, highlighting the necessity of employing dedicated models for studying the response of CB structures. Particular attention is also given to the influence of a number of scalar parameters that characterise the frequency content of the ground motion on the estimated peak displacement ratios. The relative merits of using the average spectral period T_aver, mean period T_m, predominant period T_g, characteristic period T_c and smoothed spectral predominant period T_o of the earthquake ground motion, are assessed. This paper demonstrates that the predominant period, defined as the period at which the input energy is maximum throughout the period range, is the most suitable frequency content scalar parameter for reducing the variability in displacement estimations. Finally, noniterative equivalent linearisation expressions based on the secant period and equivalent damping ratios are presented and verified for the prediction of peak deformation demands in steel structures. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

钢管混凝土柱带钢板耗能键组合剪力墙抗震研究     

董宏英  蒋峰  曹万林  武海鹏  刘恒超 《地震工程与工程振动》2012,32(4):103-110

提出了连排钢管混凝土柱带钢板耗能键组合剪力墙,它由钢管混凝土连排柱、柱间钢板耗能键、钢板耗能键外包混凝土条带三种单元组合而成。进行了4个不同设计参数试件的低周反复荷载试验研究。分析了各试件的承载力、刚度及其退化过程、滞回特性、延性和破坏特征,探讨了分灾耗能机制。研究表明:连排钢管混凝土柱带钢板耗能键组合剪力墙,承载力较大,后期刚度较稳定;混凝土条带在开裂与闭合过程中消耗地震能量,钢板耗能键通过弯剪变形消耗地震能量,钢管与混凝土条带共同工作协同耗能,具有良好的抗震耗能机制;这种新型组合剪力墙具有较强综合抗震耗能能力。  相似文献   

高强混凝土剪力墙地震损伤模型分析   总被引：4，自引：0，他引：4  

罗欣  梁兴文  邓明科 《地震工程与工程振动》2012,32(4):145-151

在分析比较现有钢筋混凝土结构的地震损伤模型的基础上,根据高强混凝土剪力墙的滞回曲线特性及刚度退化规律,采用能量耗散系数和最大变位处的卸载刚度的退化为破坏参数,提出了适用于高强混凝土剪力墙构件的双参数地震损伤模型。依据已有的高强混凝土剪力墙构件试验研究结果,对损伤模型进行非线性回归分析,确定了相应的地震损伤模型参数,提出了高强混凝土剪力墙各性能水平的损伤指数以及相应于三水准抗震设防的损伤指数允许值。分析结果表明,按本文所提出的损伤模型计算得到的剪力墙构件最终破坏时对应的损伤指数,其平均值在合理范围内,标准差较小;损伤指数计算值对应的损伤程度基本符合试验结果,计算结果离散程度较低。  相似文献   

型钢混凝土剪力墙抗震性能影响参数研究     

白晓红  楚留声 《地震工程与工程振动》2012,32(3):73-78

型钢混凝土剪力墙是一种广泛应用于高层混合结构中的剪力墙形式。本文采用通用有限元程序ADINA,以边缘构件含钢率为主要参数,对不同剪跨比的几组剪力墙承载力和变形能力进行了分析,并与考虑了剪力墙混凝土等级、轴压比、配筋率和边缘约束指标等参数影响的剪力墙性能进行了比较研究。结果表明,在高层结构中采用较高强度的混凝土是有利的,但剪力墙的轴压比需要严格限制,且墙体配筋率并不是提高其抗震性能的有效手段。在高层混合结构剪力墙中,通过边缘构件设置型钢可有效增加墙体延性,且边缘约束构件的约束指标可取0.32左右。  相似文献   

钢板剪力墙结构基本自振周期简化计算研究     

王海东  张时如  周亮  曾裕林 《地震工程与工程振动》2012,32(3):79-85

本文针对钢板剪力墙结构自振周期缺乏研究的现状,将钢板剪力墙简化为Timoshenko梁,提出了考虑周边框架影响的钢板剪力墙等效抗剪刚度计算的方法,然后根据Southwell-Dunkerley理论,给出了钢板剪力墙结构基本自振周期的简化计算公式。然后,通过56个算例比较分析了本文公式计算结果与有限元计算结果发现:本文公式计算结果与有限元结果之比的平均值为1.015,标准差为0.049,说明本文公式具有足够的可靠性。接着,又对结构高度、均布质量、等效抗剪、抗弯刚度、钢板的高厚比、高宽比等参数进行了分析,分析结果表明:随着结构高度与均布质量开方的乘积增大,结构的基本自振周期增长;层数相同时,随着等效抗剪刚度、抗弯刚度的增大,周期有减小的趋势;层数相同时,随着钢板高厚比与高宽比乘积的增大,周期增长。  相似文献   

钢结构房屋动力特性脉动法测试研究   总被引：3，自引：0，他引：3  

施卫星  魏丹  韩瑞龙 《地震工程与工程振动》2012,32(1):114-120

对上海地区的10幢钢结构建筑进行脉动法测试并采集数据,得到广义钢结构房屋的动力特性。选取其中1栋典型建筑通过多次测试和数值模拟分别验证测试的稳定性和准确性。通过分析处理测试数据建立钢结构建筑一阶周期与结构层数或高度的线性关系式,并归纳总结了等效阻尼比的测试结果,为验证结构动力特性理论计算结果、钢结构建筑减震隔震设计以及鉴定、加固改造、损伤识别提供依据。  相似文献   

新型开孔H型钢阻尼器有限元分析   总被引：2，自引：0，他引：2  

王爽  张春梅  周云 《地震学刊》2012,(3):346-352

设计了分别开椭圆形孔和菱形孔的2种新型H型钢耗能器,阐述了它们的构造与耗能原理。采用有限元软件ABAQUS对开椭圆形孔、菱形孔和条形孔这3种新型耗能器的耗能性能进行数值分析,研究了开孔形状、肢宽与肢高等参数对新型耗能器耗能性能的影响。分析结果表明：新型H型钢耗能器具有饱满的滞回曲线,屈服位移较小、耗能性能稳定,耗能器的屈服位移、初始刚度和等效阻尼比随各肢钢板宽度增大（或高度减小）而增大;在开孔率相近或者肢宽相同的情况下,菱形孔H型钢耗能器的等效阻尼比要比条形孔和椭圆形孔的大,且应力分布更加均匀。  相似文献